J5600 VISUALIZE Workstation (A5991A)
| KEYWORD |
PART NUMBER |
DESCRIPTION |
|---|
| Bezel |
A4978-62004 |
Front Bezel Assembly - Includes the front plastic cover with the hard drive access door |
| Bracket |
A4978-40011 |
I/O fan and speaker bracket assembly (blue plastic) - Mounts in front of the I/O and PCI backplane board to allow the connection of a 120mm fan and system speaker - Does NOT include the PCI card guide faceplate, fan or speaker |
| A4978-62006 |
CD-ROM drive mounting bracket - Mounts in the top right corner of the workstation |
| A4978-62007 |
DDS-3 tape (or floppy drive) mounting bracket - Mounts in the top left corner of the workstation |
| Cable |
5182-1857 |
Audio cable assembly - For CD-ROM, CD-RW, or DVD-ROM - 4-pin (F) connector to 4-pin (F) connector - 47.8cm (18.8in) long |
| A4978-63004 |
Ribbon Cable - Data cable for the DDS-3 tape (or floppy) drive and the CD-ROM drive |
| A4978-63005 |
Drive power cable assembly - Connects from the I/O and PCI backplane PC board assembly to the SCA hard drive interface board, floppy/tape drive bay, and the CD-ROM bay |
| A4978-63009 |
Ribbon Cable - Connects between the system processor board and the front panel (For the LCD display and power switch assembly) |
| A4978-89005 |
Flex cable assembly (U-shaped) - From system processor PC board to I/O and PCI backplane board
REQUIRES RETURN OF DEFECTIVE PART(New part = A4978-86005) |
| Chassis |
A4978-86007 |
Chassis assembly for J5x00/J7000 workstations - Includes chassis with side and top panels, all cooling fans, I/O fan and speaker bracket, PCI board retainer clip, drive EMI covers and trays, floppy/CD-ROM drive data and power cables, and bus bar shield |
| Display |
A4978-62025 |
LCD display with power switch mounted in a plastic bracket - Has attached 1-inch ribbon cable with male DB-25 connector |
| Drive |
A1658-69027 |
9.1GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST39102LC) - (Part of A4997A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A1658-60027) |
| A1658-69031 |
18GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST318203LC) - (Part of A4998A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A1658-60031) |
| A1658-69032 |
36.4GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST336704LC) - (Part of A6031A)
REQUIRES RETURN OF DEFECTIVE PART(New part = 0950-3694) |
| A7208-69001 |
36.4GB hot-plug Wide Ultra2 SCSI Low Voltage Differential (LVD) hard drive - 15,000 RPM, 3.5-inch form factor, 1.0-inch high - (A7208A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A7208-67001) |
| A7207-69001 |
73GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector - (Part of A7207A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A7207-67001) |
| Drive (Product) |
A4997A |
9.1GB Ultra2 wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
| A4998A |
18GB Ultra2 Wide SCSI LVD hard drive - 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector |
| A6031A |
36GB Ultra2 Wide LVD SCSI hard drive - 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector |
| A7208A |
36.4GB Ultra2 Wide SCSI LVD hard drive - 15,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
| A7207A |
73GB Ultra2 Wide SCSI LVD hard drive - 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector |
| A5001A |
32x-max CD-ROM drive - Half-height CD-ROM drive with ATAPI IDE connector |
| A7853A |
IDE CD-RW drive - 24X CD-R write, 10X CD-RW rewrite, 40X CD-ROM read |
| A5009A |
1.44MB floppy drive - 3.5-inch form factor with IDE PC/AT interface |
| A5011A |
12GB native capacity DDS-3 tape drive - Can store up to 24GB with data compression - Mounts in 3.5 inch drive tray |
| Fan |
A4978-62012 |
Tubeaxial fan (Panaflo model FBA09A12H) 92mm x 92mm x 25mm thick fan with 22cm long three wire cable - 12VDC nominal operating voltage - For cooling the system processor board - Mounts to the inner fan wall of the chassis (3 used) |
| A4978-86014 |
Tubeaxial fan kit (Panaflo model FBA12G12H) - 120mm x 120mm x 37mm thick fan with 30cm long 3-wire cable - 12VDC nominal operating voltage - Includes ESD wrist strap and instructions - Mounts in the I/O fan and speaker bracket assembly |
| Graphics (Product) |
A1299B |
HP VISUALIZE-fx10 Pro (Revision B) PCI graphics card with 128MB DDR SDRAM memory |
| A4552A |
HP VISUALIZE-fx2 graphic accelerator board - 24/8 bit accelerated 3D solids - Has EVC video connector |
| A4554A |
HP VISUALIZE-fx6 advance performance 3D solids PCI graphics card - Requires 2 PCI slots |
| A4556A |
Video output board for VISUALIZE-FX series graphics products only - Provides NTSC, PAL,AND S-VIDEO outputs |
| A4560A |
Texture memory upgrade for VISUALIZE-fx6 - Adds 16MB texture memory and 32KB x 32KB virtual texture cache |
| A4977A |
HP VISUALIZE-EG PCI graphics card with 4MB memory - The EG card is 8 plane with 8 overlay planes - Can be used in either a 3.3V or 5.0V PCI slot |
| A4982B |
HP VISUALIZE-fxe PCI graphics card with 9.5MB of texture memory (24MB SDRAM total memory) , 32-bit, 66MHz |
| Hardware |
0361-1315 |
Plastic Rivet (Black Nylon) - 0.161 inch body diameter, 0.177 to 0.217 inch grip range - Used to secure the system board cooling fans to the fan bracket on the inner chassis wall |
| A4978-00039 |
Cover thumbscrew - 6-32 thread - Holds the top cover on the chassis (two used) |
| Interface (Product) |
A3739A |
FDDI LAN PCI network adapter board |
| A4926A |
LAN adapter - 1000Base-SX PCI Gigabit Ethernet LAN adapter - Supports all PCI bus configurations |
| J3525A |
WAN adapter - Two port X.25 PCI frame relay adapter card |
| J3526A |
WAN adapter - Four port X.25 frame relay adapter card |
| Keyboard |
A4983-60401 |
USB keyboard with PC-104 layout - Has 2.9m (10ft) cable with type (A) USB connector (Options ABA, ABC, ABH, ABJ, ABM, ABZ and AB2 - English) |
| A4983-60403 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABD - German) |
| A4983-60404 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABE - European Spanish) |
| A4983-60405 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABF - European French) |
| A4983-60406 |
USB keyboard with JIS-109 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option AR0 - Japan, Kanji) |
| A4983-60409 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABN - Norwegian) |
| A4983-60411 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABP and ABQ - Switzerland, German/French) |
| A4983-60412 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABS and ABX - Swedish/Finnish) |
| A4983-60413 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABU - U.K., English) |
| A4983-60414 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option AKX - Belgian Flemish) |
| A4983-60416 |
USB keyboard with PC-104 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABY - Danish) |
| A4983-60421 |
USB keyboard with PC-106 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option AB1 - Korean) |
| A4983-60423 |
USB keyboard with PC-104 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option AB0 - Taiwan, Traditional Chinese) |
| Memory (DIMM) |
A3863-69001 |
512MB, 120MHz SDRAM DIMM memory module - (Part of A4995A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A3863-66501) |
| Memory (Product) |
A4994A |
256MB, 120MHz SDRAM DIMM memory module |
| A4995A |
512MB, 120MHz SDRAM DIMM memory module |
| A6016A |
1024MB, 120MHz SDRAM DIMM memory module |
| Module |
A1658-86004 |
Realtime clock module kit - Includes clock module, ESD wrist strap, and replacement instructions - Mounts towards the front on the I/O and PCI backplane PC board |
| Mouse |
A4983-60101 |
USB 3-button scrolling mouse (Quartz Gray) - Has 2.9m (10ft) cable with type (A) USB connector |
| A4983-65111 |
USB 3-button mouse (Quartz Gray) - Has 2.9m (10ft) cable with type (A) USB connector |
| PC Board |
A4978-89006 |
SCA hard drive interface backplane PC board assembly - Mounts on the rear of the drive bay assembly
REQUIRES RETURN OF DEFECTIVE PART(New part = A4978-86006) |
| A5991-69010 |
System Processor Board and tray assembly - Includes two 552MHz PA-8600 RISC processors - Mounts in the center left side of the chassis assembly
REQUIRES RETURN OF DEFECTIVE PART(New part = A5991-60010) |
| Power Cord |
8120-5334 |
Power cord (Black) - 17 AWG, 3-wire, 2.5m (8.2ft) long - Has straight (F) C15 receptacle with a 'U' shaped channel above the ground pin to prevent use of a lower rated power cord (For 240VAC in the United Kingdom) |
| 8120-5336 |
Power cord (Black) - 17 AWG, 3-wire, 2.5m (8.2ft) long - Has straight (F) C15 receptacle with a 'U' shaped channel above the ground pin to prevent use of a lower rated power cord (For 220VAC in Europe) |
| 8120-5337 |
Power cord (Black) - 16 AWG, 2.5m (8.2ft) long - Has straight (F) C15 receptacle with a 'U' shaped channel above the ground pin to prevent use of a lower rated power cord (For 120VAC in the United States and Canada) |
| 8120-5339 |
Power cord (Black) - 17 AWG, 3-wire, 2.5m (8.2ft) long - Has straight (F) C15 receptacle with a 'U' shaped channel above the ground pin to prevent use of a lower rated power cord (For 220VAC in Switzerland) |
| 8120-5340 |
Power cord (Black) - 17 AWG, 3-wire, 2.5m (8.2ft) long - Has straight (F) C15 receptacle with a 'U' shaped channel above the ground pin to prevent use of a lower rated power cord (For 220VAC in Denmark) |
| 8120-5341 |
